Yaskawa VS-616G5 Series Revision F Programming Manual Instrukcja Użytkownika Pobierz pdf (Strona 69)

VS-616G5 Programming Manual 69

V/f V/f w/PG

Open Loop

Vector

Flux

Vector

Setting Range: 0.00 to 2.50

Factory Default: 1.00

Sets the channel 1 output gain for the analog output monitors. To obtain the output level, multiply the

monitor output level by the gain value set in F4-02.

18 Motor secondary current (Iq) Monitors the calculated value of the motors secondary current. (Iq) The motors

rated secondary current corresponds to 100%. 10 V=Rated secondary current.

(0 to + 10 V output)

19 Motor excitation current (Id) Monitors the calculated value of the motors excitation current. (Id) The motors

rated excitation current corresponds to 100%. 10 V=Rated excitation current. (0

to + 10 V output).

20 SFS output frequency Monitors the output frequency after a soft start. This is the frequency without the

correction from compensation functions such as slip compensation. 10 V=Max.

frequency (0 to +/- 10 V possible)

21 ASR input Monitors the input to the speed control loop. The max. frequency corresponds to

100%. 10 V=Max. frequency (0 to +/- 10 V possible)

22 ASR output Monitors the output from the speed control loop. Analog monitor becomes 10 V/

max. output frequency with V/F control. In vector control the analog monitor be-

comes 10V= motor rated excitation current. (0 to +/-10V possible.)

23 Speed deviation Monitors the speed deviation within the speed control loop. The max. frequency

corresponds to 100%. 10 V=Max. frequency (0 to +/-10 V possible.)

24 PID feedback Monitors the feedback value when the PID control is utilized. The input for the

max. frequency corresponds to 100%. 10 V= Max frequency.

(0 to +/-10 V possible.)

25 Not Used --

26 Voltage reference (Vq output) Monitors the inverters internal voltage reference value for the motors secondary

current control. 10 V= 200,400 or 575 VAC (0 to =/- 10 V possible.)

27 Voltage reference (Vd output) Monitors the inverters internal voltage reference value for the motors excitation

current control. 10 V= 200,400 or 575 VAC (0 to =/- 10 V possible.)

28-30 Not Used --

31 Not Used --

32 ACR(q) Output Monitors current control output value for the motors secondary current.

10 V= 100%.

33 ACR(d) Output Monitors current control output value for the motors excitation current.

10 V= 100%.

34-35 Not Used --

36 PID Input Monitor Monitors the input to the PID circuit. This is the PID reference + the PID reference

bias - the PID feedback. 10 V= Max frequency.

37 PID Output Monitor Monitors the output of the PID circuit. 10 V= Max frequency.

38 PID Setpoint or Reference Monitors the PID setpoint. This is the PID setpoint + the PID setpoint bias.

10 V= Max frequency.

F4-02 Analog Output Channel 1 Gain AO CH1 Gain

A A A A

Analog Output Channel 1 Selection (Continued)

F4-01 Setting Function Description

Section F: Option Parameters

F4 AO-08/AO-12 Option Set-up

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 161 162

Komentarze do niniejszej Instrukcji

Brak uwag

Yaskawa VS-616G5 Series Revision F Programming Manual Instrukcja Użytkownika Strona 69

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Yaskawa VS-616G5 Series Revision F Programming Manual